Version 1.16 of BusLogic Family SCSI Adapter Device Driver
for NEXTSTEP Release 3.2 for Intel Processors

The new version supports BusLogic BT946C PCI SCSI adapter under NeXTSTEP 
Release 3.2 for Intel Processors

The new version of the driver has been uploaded to ftp.cs.orst.edu and placed 
in  the /pub/next/binaries/drivers directory.

The appropriate files are:

ftp://ftp.cs.orst.edu/pub/next/binaries/drivers/BusLogicFamily_1.16.README
ftp://ftp.cs.orst.edu/pub/next/binaries/drivers/BusLogicFamily_1.16.tar.Z

OVERVIEW:

BusLogic Family SCSI adapter device driver lets you take advantage of
the following SCSI adapters:
Manufacturer    Adapter   PC Bus  Tested firmware
Bus Logic       445S     VL-Bus  3.31C, 3.36 , 3.37
Bus Logic       445C     VL-Bus  4.21
Bus Logic       747S     EISA    3.37
Bus Logic       946C     PCI     4.22

Note: There is a very high probability that other version of firmware
mentioned above will work with driver.

COPYING:
The BusLogicFamily is shareware. You can freely distribute without
changing or removing any parts of the package. If you found the driver
reliable, please, register the driver. For more details see document
Registration.rtf inside BusLogicFamily_1.16.tar.Z.

Changes between version 1.13 and 1.16:
1. The version 1.13 of the driver was tested and works with these
    versions of the firmware on BT445C: 4.21
2. The driver was adapted to work with PCI BT946C and was tested with
   these versions of the firmware: 4.22
3. The driver now uses the disconnect flag from scsiReq to
   determine correct disconnection setting.
4. The SCSI selection timeout was extended from default 250 ms
   to 500 ms.

Contact:
Tomas Hurka                              Ondrej Cada
Hukatronic (H.C.C.)                      OCSoftware
Kankovskeho 8                            Pernerova 61
182 00 Praha 8                           180 00 Praha 8
Czech Republic                           Czech Republic
e-mail: tom@hukatronic.cz                e-mail: ocs@earn.cvut.cz